Actron CP7009 Uživatelský manuál stáhnout pdf

GAUGE

DASHBOARD

BRACKET

NUTS

(KNURLED)

Figure 1

Gauge Mounting: do not install bracket and nuts

until step 10.

FUEL LEVEL GAUGE

INSTALLATION INSTRUCTIONS

This fuel level gauge indicates the depth, not the

amount, of fuel left in the fuel tank. Because of the

variety of fuel tank shapes, this universal gauge

cannot compensate for the different rates that the

fuel drops at various tank depths.

IMPORTANT!

This gauge is not designed as a direct replace-

ment for factory gauges. It should be used

only with our fuel level tank sender (SOLD

SEPARATELY).

The sender is not designed as a direct replace-

ment for factory senders. It should be used only

with our fuel level gauges.

INSTALLATION MAY REQUIRE FABRICATION.

See the FUEL LEVEL TANK SENDER INSTRUC-

TIONS included with the sender for adjustment

procedures that are required to complete the

installation.

PRECAUTIONS

1. Read instructions before proceeding.

2. Observe all safety precautions contained in these

instructions and the instructions for the fuel level

tank sender.

3. Drain fuel from the fuel tank into a safe,

vented container and remove the fuel tank

from the vehicle if any modifications to the

tank are necessary. Fill the tank with water

to displace fuel vapors, then drain tank and dry

thoroughly.

4. Disconnect the battery ground cable before

performing any electrical work.

5. Route all wiring away from linkages, engine parts

that become hot, or moving parts.

6. Never smoke while working on your vehicle and





7. Never lay tools on top of the battery or wear

jewelry during electrical work to avoid severe

electrical shorts.

8. Locate and operate gauges so that driving

visibility is not compromised.

INSTALLATION

Make temporary test connection before permanently

mounting hardware or drilling holes.

This gauge can be mounted into any surface or into

a gauge pod. Refer to Figure 1.

1. Disconnect ground cable from battery before

electrical work is performed.

2. Choose a location to mount the gauge where it

will be viewable from a normal driving position.

 



the gauge. Do not accidentally cut any wires or

hoses. Be sure there is clearance around the

hole for the gauge mounting bracket.

4. Connect the blue and white wires using either

Figure 2a or Figure 2b.

Figure 2a

For Positive Dimmer Controls

GAUGE

BLUE



DASH



GROUND



CONTROL

GROUND

+12V

Figure 2b

For Negative Dimmer Controls

GROUND



CONTROL

DASH





BLUE

+12V

GAUGE

Sunpro



Cleveland, OH 44135, U.S.A.



Sunpro



Corporation used under license to



Corporation



For warranty information



1 2 3 4

Shrnutí obsahu

Strany 1 - INSTALLATION INSTRUCTIONS

1GAUGEDASHBOARDBRACKETNUTS (KNURLED)Figure 1Gauge Mounting: do not install bracket and nuts until step 10.FUEL LEVEL GAUGEINSTALLATION INSTRUCTIONSTh

Strany 2 - TROUBLESHOOTING

2TO FUSE Figure 3AND SENDER TO GROUND ON FUEL TANKGauge to Sender Connection5. Read the fuel level tank sender instructions an

Strany 3 - INSTRUCCIONES DE INSTALACIÓN

3INDICADOR DE NIVEL DEL COMBUSTIBLEINSTRUCCIONES DE INSTALACIÓNEste indicador de nivel de combustible indica la profundidad, y no la cantidad, de

Strany 4 - INSTRUCTIONS D’INSTALLATION

44. Conecte los alambres azul y blanco usando la Figura 2a o la Figura 2b. 5. Lea las instrucciones del transmisor de nivel de tanque de combuatib

Komentáře k této Příručce

Žádné komentáře

Actron CP7009 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Měřící nástroje Actron CP7009. Actron CP7009 User Manual Uživatelská příručka

Shrnutí obsahu

Komentáře k této Příručce

Související produkty a manuály pro Měřící nástroje Actron CP7009